LTE TDD
For Waveform Playback (ARB) capability.
This topic describes the settings of the Downlink > DCI node for an Advanced TDD Downlink carrier.
Dynamic Uplink Downlink Configuration
Tx Config (Transmission Configuration)
Tx Config (Transmission Configuration)
PDCCH: Random Access Procedure
Tx Config (Transmission Configuration)
Tx Config (Transmission Configuration)
Tx Config (Transmission Configuration)
Query only
Displays the identifying number of the selected channel.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:CHNumber? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:CHNumber? |
|
Preset |
|
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the name (type) of the selected channel. DCI = Downlink Control Information.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:NAMe? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:NAMe? |
|
Preset |
|
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the channel state.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI[:STATe]? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:STATe? |
|
Preset |
ON |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets a power level, in dB for the selected channel.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:POWer <rel_ampl> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:POWer? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:POWer 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:POWer? |
|
Notes |
Power relative to average subcarrier power (dB). |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
-60 |
|
Max |
20 |
|
Initial S/W Revision |
A.20.01 |
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:SCRamble[:STATe] ON|OFF|1|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:SCRamble[:STATe]? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:SCRamble:STATe ON :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:SCRamble:STATe? |
|
Preset |
ON |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DUDConfig:FRAMe<n>? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DUDConfig:FRAMe0? |
|
Notes |
TDD Uplink-Downlink configuration for the frame (0–6). Frame 0 alias: DUDConfig:FRAMe. Frames 1–15 (DUDConfig:FRAMe<n>) are present only when Dynamic TDD is enabled and within the waveform length. |
|
Dependencies |
Read-only. Set by software from the TDD UL/DL configuration. |
|
Couplings |
|
|
Preset |
0 |
|
State Saved |
No |
|
Min |
0 |
|
Max |
6 |
|
Initial S/W Revision |
A.20.01 |
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:OCNG[:STATe] ON|OFF|1|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:OCNG[:STATe]? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:OCNG:STATe ON :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:OCNG:STATe? |
|
Couplings |
When ON, unused PDCCH candidates are filled with OCNG. |
|
Preset |
ON |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the PDCCH symbol allocations for the frame (set via the Dynamic Uplink Downlink Configuration window).
Frame 0 alias: PDCCh:ALLoc:FRAMe. Frames 1–15 (PDCCh:ALLoc:FRAMe<n>) are present only when Dynamic TDD is enabled and within the waveform length.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:PDCCh:ALLoc:FRAMe<n>? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:PDCCh:ALLoc:FRAMe0? |
|
Dependencies |
Read-only. Set by software from the TDD UL/DL configuration. |
|
Preset |
3,2,0,0,0,3,2,0,0,0 |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Turns the Carrier Indicator Field (CIF) presence state on or off in PDCCH DCI formats.
See 3GPP TS 36.211, 36.212, 36.213 and 36.331.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:CIF[:STATe] ON|OFF|1|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:CIF[:STATe]? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:CIF:STATe OFF :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:CIF:STATe? |
|
Dependencies |
When ON, enables Carrier Indicator Field; PDSCH Start and Scheduling Cell ID become active. |
|
Preset |
OFF |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the starting OFDM symbol of PDSCH for the concerned secondary cell.
See 3GPP TS 36.211, 36.212, 36.213 and 36.331.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:PDSCh:STARt <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:PDSCh:STARt? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:PDSCh:STARt 3 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:PDSCh:STARt? |
|
Dependencies |
Read-only when CIF Presence is OFF. Editable when CIF Presence is ON. |
|
Preset |
3 |
|
State Saved |
Yes |
|
Min |
1 |
|
Max |
4 |
|
Initial S/W Revision |
A.20.01 |
Sets the serving cell index of the cell that signals the downlink allocations and uplink grants for the concerned secondary cell.
See 3GPP TS 36.211, 36.212, 36.213 and 36.331.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:SCHed:CID <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:SCHed:CID? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:SCHed:CID 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:SCHed:CID? |
|
Dependencies |
Read-only when CIF Presence is OFF. Editable when CIF Presence is ON. |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
7 |
|
Initial S/W Revision |
A.20.01 |
Dedicated PDCCH Settings for DL-SCH
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI <n>:STATe ON|OFF|1|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI <n>:STATe? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI:STATe ON :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI:STATe? |
|
Notes |
Controls the operating state of the DCI channel. Choice: Off | On. |
|
Preset |
ON |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
When RNTI Type is SI-RNTI or P-RNTI and VRB Type is Distributed, select Format 1A or 1C; otherwise the format is auto-selected by software based on RNTI Type, Transmission Mode, VRB Type, Resource Allocation Type, and Diversity Method.
See 3GPP TS 36.212 and 36.213.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI <n>:FORMat F0|F1|F1A|F1B|F1C|F1D|F2|F2A|F2B|F2C|F2D|F3|F3A [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI <n>:FORMat? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:FORMat F1A :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:FORMat? |
|
Choices |
Format 0 | Format 1 | Format 1A | Format 1B | Format 1C | Format 1D | Format 2 | Format 2A | Format 2B | Format 2C | Format 2D | Format 3 | Format 3A. |
|
Preset |
F1A (Format 1A) |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the data source of the DCI channel.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:DATa? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:DATa? |
|
Preset |
DL-SCH #1 (for DCI #1) In incremental order for subsequent DCI #2-8 |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the payload size, in bits. Refer to the 3GPP technical standards for more information.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:PSIZe? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:CCARrier:DLINk:DCI:DLSCh:DCI:PSIZe? |
|
Preset |
30+0 |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Radio Network Temporary Identifier for PDSCH scheduling transmitted on PDCCH.
See 3GPP TS 36.211, 36.212 and 36.321.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:RNTi <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:RNTi? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:RNTi 1 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:RNTi? |
|
Notes |
Range depends on RNTI Type in DL-SCH: 0 to 65533 (C-RNTI, flexible use; standard C-RNTI is 1 to 65523), 65534 (P-RNTI), 65535 (SI-RNTI). Accepts decimal or hexadecimal input; e.g. "15" or "0xf" both display as "15 (0x000F)". |
|
Preset |
1 |
|
State Saved |
Yes |
|
Min |
1 |
|
Max |
65535 |
|
Initial S/W Revision |
A.20.01 |
Sets the transmission couple state between DCI and DL-SCH.
DLSCH = DL-SCH
MAN = Manual / non-coupled
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:TXCouple DLSCH|MAN [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:TXCouple? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:TXCouple DLSCH :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:TXCouple? |
|
Choices |
DL-SCH | Manual |
|
Preset |
DLSCH |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the UE Tx Antenna for the selected DCI channel.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:UTXantenna PORT0|PORT1 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:UTXantenna? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:UTXantenna PORT0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:UTXantenna? |
|
Choice |
UE Port 0 | UE Port 1 |
|
Preset |
PORT0 |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the search space of the PDCCH channel.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:SSPace COMM|UESP [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:SSPace? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:SSPace UESP :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:SSPace? |
|
Choices |
Common | UE-Specific. |
|
Preset |
UESP |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Per-subframe DL-SCH PDCCH transmission grid.
Each row is addressed by the collection suffix TX<seq>, seq = 1..160 (Seq 1 = TX1).
Import/Export act on the entire grid.
Enables/disables the PDCCH transmission for this subframe entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:TX<seq>:STATe ON|OFF|1|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:TX<seq>:STATe? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:TX1:STATe ON :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:TX1:STATe? |
|
Choices |
Off | On |
|
Preset |
ON |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
PUCCH transmit-power-control command for this entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:TX<seq>:PUCCh:TPC TPC0|TPC1|TPC2|TPC3 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:TX<seq>:PUCCh:TPC? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:TX1:PUCCh:TPC TPC0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:TX1:PUCCh:TPC? |
|
Choice |
TPC #0 (-1dB) | TPC #1 (0dB) | TPC #2 (1dB) | TPC #3 (3dB) |
|
Preset |
TPC0 |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Downlink Assignment Index for this entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:TX<seq>:DAI <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:TX<seq>:DAI? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:TX1:DAI 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:TX1:DAI? |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
3 |
|
Initial S/W Revision |
A.20.01 |
SRS request field for this entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:TX<seq>:SRSReq <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:TX<seq>:SRSReq? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:TX1:SRSReq 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:TX1:SRSReq? |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
3 |
|
Initial S/W Revision |
A.20.01 |
PDCCH aggregation level (number of CCEs).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:TX<seq>:AGGLevel L1|L2|L4|L8 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:TX<seq>:AGGLevel? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:TX1:AGGLevel L1 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:TX1:AGGLevel? |
|
Choices |
Agg Level 1 | Agg Level 2 | Agg Level 4 | Agg Level 8 |
|
Preset |
L1 |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
PDCCH candidate index within the search space for this entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:TX<seq>:CANDidate <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:TX<seq>:CANDidate? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:TX1:CANDidate 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:DLSCh:DCI1:TX1:CANDidate? |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
5 |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the starting CCE offset for this entry (derived from candidate / aggregation level).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:DLSCh:DCI<n>:TX<seq>:CCE:OFFSet? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:CCARrier:DLINk:DCI:DLSCh:DCI:TX:CCE:OFFSet? |
|
Preset |
11 |
|
State Saved |
No |
|
Min |
0 |
|
Max |
1023 |
|
Initial S/W Revision |
A.20.01 |
Dedicated PDCCH Setting for UL_SCH Scheduling
Sets the uplink system bandwidth and number of RBs. When the downlink system bandwidth changes, software automatically changes this setting to match.
Used for DCI Format 0 (PUSCH scheduling).
See 3GPP TS 36.211, 36.212, 36.213.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:ULBW F1400K|F3M|F5M|F10M|F15M|F20M [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:ULBW? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:ULBW F10M :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:ULBW? |
|
Choices |
1.4 MHz (6RB) | 3 MHz (15RB) | 5 MHz (25RB) | 10 MHz (50RB) | 15 MHz (75RB) | 20 MHz (100RB). |
|
Dependencies |
Auto-set to the downlink system bandwidth when the downlink bandwidth changes. |
|
Preset |
F10M (10 MHz (50RB)) |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Transmission mode of PUSCH scheduling on PDCCH.
1 = Single Antenna Port (Port 10)
2 = Single Antenna Port (Port 10) / Closed-Loop Spatial Multiplexing.
See 3GPP TS 36.211, 36.212, 36.213.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:ULTM TM1|TM2 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:ULTM? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:ULTM TM1 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:ULTM? |
|
Choices |
1 | 2 |
|
Couplings |
Determines available Number of Antennas, Number of Codewords and DCI Format. |
|
Preset |
TM1 (1) |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the number of antennas of PUSCH scheduling on PDCCH.
Derived from Transmission Mode by software (read-only). Query returns AT1|AT2|AT4.
See 3GPP TS 36.211, 36.213.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:ULNa AT1|AT2|AT4 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:ULNa? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:ULNa AT1 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:ULNa? |
|
Choices |
1 Antenna (TM 1) | 2 Antennas | 4 Antennas (TM 2) |
|
Couplings |
|
|
Preset |
AT1 (1 Antenna) |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the number of codewords of PUSCH scheduling on PDCCH.
Derived from Transmission Mode by software (read-only).
See 3GPP TS 36.211, 36.212, 36.213.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:ULCW? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:ULCW? |
|
Range |
1 (TM 1) 1 to 2 (TM 2) |
|
Preset |
1 |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Turns the operating state of the DCI channel to on or off.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>[:STATe] ON|OFF|1|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>[:STATe]? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:STATe OFF :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:STATe? |
|
Choices |
Off | On |
|
Preset |
OFF |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the DCI Format transmitted on PDCCH. Selected by software from Transmission Mode / Number of Codewords (read-only).
Query returns F0|F4.
See 3GPP TS 36.211, 36.212, 36.213.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:FORMat? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:FORMat? |
|
Choices |
Format 0 (TM 1) Format 0 | Format 4 (TM 2 with Number of Codewords 1) Format 4 (TM 2 with Number of Codewords 2) |
|
Dependencies |
Read-only. Determined by Transmission Mode and Number of Codewords. |
|
Preset |
F0 (Format 0) |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the data source of the DCI channel.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:DATa? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:DATa? |
|
Preset |
Auto |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Displays the payload size, in bits.
Refer to the 3GPP technical standards for more information.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:PSIZe? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:PSIZe? |
|
Preset |
30+0 |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the C-RNTI of PUSCH scheduling transmitted on PDCCH.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:RNTi <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:RNTi? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:RNTi 1 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:RNTi? |
|
Range |
0 to 65535 (0x0000 to 0xFFFF); standard C-RNTI is 1 to 65523, but 0 to 65535 is allowed for flexible use. Accepts decimal or hexadecimal input; e.g. "15" or "0xf" both display as "15 (0x000F)". See 3GPP TS 36.211, 36.212 and 36.321. |
|
Preset |
1 (0x0001) |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
65535 |
|
Initial S/W Revision |
A.20.01 |
Sets the UE Tx Antenna for the selected DCI channel.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:UTXantenna PORT0|PORT1 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:UTXantenna? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:UTXantenna PORT0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:UTXantenna? |
|
Choices |
UE Port 0 | UE Port 1 |
|
Preset |
PORT0 |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the search space of the PDCCH channel.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:SSPace UESP|COMM [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:SSPace? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:SSPace UESP :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:SSPace? |
|
Choices |
Common | UE-Specific |
|
Preset |
UESP |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Selects the PUSCH Hopping Mode for DCI Format 0; otherwise inactive.
See 3GPP TS 36.211, 36.212, 36.213.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:HOPMode OFF|INTer|INTRa [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:HOPMode? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:HOPMode OFF :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:HOPMode? |
|
Choices |
Depends on DCI Format:
|
|
Dependencies |
Active only for DCI Format 0. |
|
Preset |
OFF |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Selects the Hopping Type. (T1PQ = +1/4, T1MQ = -1/4, T1PH = +1/2, T2 = Type2.)
Refer to the 3GPP technical standards.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:HOPType T1PQ|T1MQ|T1PH|T2 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:HOPType? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:HOPType T1PH :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:HOPType? |
|
Choices |
Type1 +1/4 | Type1 -1/4 | Type1 +1/2 | Type2 |
|
Preset |
T1PH (Type1 +1/2) |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the Hopping Offset (N_HO_RB) used when Hopping Mode is on. Software limits input to avoid non-contiguous RB or out-of-bandwidth mapping. A warning is shown after generation if mapping is impossible.
Calculated value:
N_sb_RB = Floor((N_UL_RB - N_HO_RB - N_HO_RB mod 2)/Nsb).
See 3GPP TS 36.211 and 36.213.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:HOFFset <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:HOFFset? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:HOFFset 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:HOFFset? |
|
Dependencies |
Active only when Hopping Mode is on. Max = minimum of 98 or calculated value. |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
minimum (98 or Calculated Value) |
|
Initial S/W Revision |
A.20.01 |
Sets the number of Sub-bands (Nsb) used when Hopping Mode is on. Software limits input to avoid non-contiguous RB or out-of-bandwidth mapping.
See 3GPP TS 36.211 and 36.213.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:HSUBbands <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:HSUBbands? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:HSUBbands 1 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:HSUBbands? |
|
Notes |
Number of Sub-bands (Nsb) used when Hopping Mode is on. Software limits input to avoid non-contiguous RB or out-of-bandwidth mapping. See 3GPP TS 36.211 and 36.213. |
|
Dependencies |
Active only when Hopping Mode is on. |
|
Preset |
1 |
|
State Saved |
Yes |
|
Min |
1 |
|
Max |
4 |
|
Initial S/W Revision |
A.20.01 |
Per-subframe UL-SCH PDCCH transmission grid.
Each row is addressed by the collection suffix TX<seq>, seq = 1..160 (Seq 1 = TX1).
Enables/disables the PDCCH transmission for this subframe entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:STATe ON|OFF|1|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:STATe? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:STATe ON :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:STATe? |
|
Choices |
Off | On |
|
Preset |
OFF |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the Resource allocation type: 0 (single cluster) or 1 (multi cluster).
Shown for DCI Format 4 / DCI 0 with UL BW <= DL BW
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:RATYpe <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:RATYpe? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:RATYpe 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:RATYpe? |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
1 |
|
Initial S/W Revision |
A.20.01 |
Sets the RB (VRB) start offset for RA Type 0. The maximum value depends on system bandwidth.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:RBOFfset <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:RBOFfset? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:RBOFfset 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:RBOFfset? |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
RBmax –1 |
|
Initial S/W Revision |
A.20.01 |
Sets the number of contiguous RBs for RA Type 0. The maximum value depends on system bandwidth.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:RBSize <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:RBSize? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:RBSize 25 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:RBSize? |
|
Preset |
50 |
|
State Saved |
Yes |
|
Min |
1 |
|
Max |
RBmax |
|
Initial S/W Revision |
A.20.01 |
Sets the RBG start of cluster #1 for RA Type 1 (S0).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:RBGS1 <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:RBGS1? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:RBGS1 1 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:RBGS1? |
|
Dependencies |
Visible if RA Type is 1. |
|
Preset |
1 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
Depends on UL bandwidth (4, 6, 11, 15, 17, or 23) |
|
Initial S/W Revision |
A.20.01 |
Sets the RBG end of cluster #1 for RA Type 1 (S1-1).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:RBGe1 <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:RBGe1? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:RBGe1 8 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:RBGe1? |
|
Dependencies |
Visible if RA Type is 1. |
|
Preset |
8 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
Depends on UL bandwidth (4, 6, 11, 15, 17, or 23) |
|
Initial S/W Revision |
A.20.01 |
Sets the RBG start of cluster #2 for RA Type 1 (S2).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:RBGS2 <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:RBGS2? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:RBGS2 10 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:RBGS2? |
|
Dependencies |
Visible if RA Type is 1. |
|
Preset |
10 |
|
State Saved |
Yes |
|
Min |
3 |
|
Max |
Depends on UL bandwidth (6, 8, 13, 17, 19, or 25) |
|
Initial S/W Revision |
A.20.01 |
Sets the RBG end of cluster #2 for RA Type 1 (S3-1).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:RBGe2 <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:RBGe2? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:RBGe2 16 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:RBGe2? |
|
Dependencies |
Visible if RA Type is 1. |
|
Preset |
16 |
|
State Saved |
Yes |
|
Min |
3 |
|
Max |
Depends on UL bandwidth (6, 8, 13, 17, 19, or 25) |
|
Initial S/W Revision |
A.20.01 |
Modulation and coding scheme index for codeword 1.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:MCS1 <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:MCS1? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:MCS1 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:MCS1? |
|
Dependencies |
Visible if state is ON. |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
31 |
|
Initial S/W Revision |
A.20.01 |
Turns the New Data Indicator for codeword 1 on or off.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:NDI1 ON|OFF|1|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:NDI1? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:NDI1 OFF :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:NDI1? |
|
Choice |
Off | On |
|
Dependencies |
Visible if state is ON. |
|
Preset |
OFF |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the Modulation and coding scheme index for codeword 2 (TM 2 / 2 codewords).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:MCS2 <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:MCS2? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:MCS2 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:MCS2? |
|
Dependencies |
Visible if state is ON, and Transmission Mode is 2:Closed-Loop Spatial Multiplexing |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
31 |
|
Initial S/W Revision |
A.20.01 |
Turns the New Data Indicator for codeword 2 on or off.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:NDI2 ON|OFF|1|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:NDI2? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:NDI2 OFF :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:NDI2? |
|
Choice |
Off | On |
|
Dependencies |
Visible if state is ON, and Transmission Mode is 2:Closed-Loop Spatial Multiplexing |
|
Preset |
OFF |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the PUSCH transmit-power-control command for this entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:PUSCh:TPC TPC0|TPC1|TPC2|TPC3 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:PUSCh:TPC? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:PUSCh:TPC TPC0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:PUSCh:TPC? |
|
Choices |
TPC #0 | TPC #1 | TPC #2 | TPC #3. |
|
Dependencies |
Visible if state is ON, |
|
Preset |
TPC0 |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Cyclic shift for DM-RS of this entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:CSHift <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:CSHift? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:CSHift 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:CSHift? |
|
Dependencies |
Visible if state is ON. |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
7 |
|
Initial S/W Revision |
A.20.01 |
UL index field (TDD). Shown for TDD UL/DL config 0; alternates with DAI.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:ULINdex <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:ULINdex? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:ULINdex 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:ULINdex? |
|
Dependencies |
Visible if state is ON. |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
3 |
|
Initial S/W Revision |
A.20.01 |
Turns the CSI request field for this entry on or off.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:CSIReq ON|OFF|1|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:CSIReq? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:CSIReq OFF :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:CSIReq? |
|
Choices |
Off | On |
|
Dependencies |
Visible if state is ON. |
|
Preset |
OFF |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the SRS request field for this entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:SRSReq <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:SRSReq? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:SRSReq 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:SRSReq? |
|
Dependencies |
Visible if state is ON. |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
3 (DCI Format 4 case) 1 (DCI Format 0 and UE-specific search space case) |
|
Initial S/W Revision |
A.20.01 |
Precoding and number-of-layers index (TPMI/layers) for this entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:PLAYers <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:PLAYers? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:PLAYers 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:PLAYers? |
|
Dependencies |
Visible if state is ON. Editable when Transmission Mode is 2:Closed-Loop Spatial Multiplexing. |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
5 (Uplink Transmission Mode 2, Uplink Number of Antennas 2, Uplink Number of Codewords 1, DCI Format 4 case) 0 (Uplink Transmission Mode 2, Uplink Number of Antennas 2, Uplink Number of Codewords 2, DCI Format 4 case) 39 (Uplink Transmission Mode 2, Uplink Number of Antennas 4, Uplink Number of Codewords 1, DCI Format 4 case) 28 (Uplink Transmission Mode 2, Uplink Number of Antennas 4, Uplink Number of Codewords 2, DCI Format 4 case |
|
Initial S/W Revision |
A.20.01 |
Displays the decoded precoding/layers message for this entry (e.g. "2Layers: TPMI=0"). Read-only.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:MESSage? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:MESSage? |
|
Dependencies |
Read-only. Translated from Precoding/Layers. Visible if state is ON. |
|
Preset |
"" |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the PDCCH aggregation level (number of CCEs).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:AGGLevel L1|L2|L4|L8 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:AGGLevel? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:AGGLevel L1 |
|
Choices |
Agg Level 1 | Agg Level 2 | Agg Level 4 | Agg Level 8. |
|
Dependencies |
Visible if state is ON. |
|
Preset |
L1 |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the PDCCH candidate index within the search space for this entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:CANDidate <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:CANDidate? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:CANDidate 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:CANDidate? |
|
Dependencies |
Visible if state is ON. |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
5 |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the starting CCE offset for this entry (derived from candidate / aggregation level).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULSCh:DCI<n>:TX<seq>:CCE:OFFSet? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULSCh:DCI1:TX1:CCE:OFFSet? |
|
Preset |
11 (for seq 1) |
|
State Saved |
No |
|
Min |
0 |
|
Max |
1023 |
|
Initial S/W Revision |
A.20.01 |
Dedicated PDCCH Settings for Random Access Procedure
Turns the operating state of the DCI channel on or off.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:STATe ON|OFF|1|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:STATe? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:STATe ON :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:STATe? |
|
Choices |
Off | On |
|
Preset |
ON |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the DCI format of the channel. Fixed to Format 1A for the random access procedure.
See 3GPP TS 36.212 and 36.213.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:FORMat? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:FORMat? |
|
Dependencies |
Read-only. Always Format 1A. |
|
Preset |
Format 1A |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the data source of the DCI channel.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:DATa? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:DATa? |
|
Preset |
Auto |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the payload size in bits. Refer to the 3GPP technical standards for more information.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:PSIZe? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:PSIZe? |
|
Preset |
0+0 |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the C-RNTI for random access procedure initiation transmitted on PDCCH.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:RNTi <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:RNTi? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:RNTi 1 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:RNTi? |
|
Notes |
Range 0 to 65535 (0x0000 to 0xFFFF); standard C-RNTI is 1 to 65523, but 0 to 65535 is allowed for flexible use. Accepts decimal or hexadecimal input; e.g. "15" or "0xf" both display as "15 (0x000F)". See 3GPP TS 36.211, 36.212 and 36.321. |
|
Preset |
1 (0x0001) |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
65535 |
|
Initial S/W Revision |
A.20.01 |
Sets the UE Tx Antenna for the selected DCI channel.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:UTXantenna UEP0|UEP1 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:UTXantenna? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:UTXantenna UEP0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:UTXantenna? |
|
Choices |
UE Port 0 | UE Port 1 |
|
Preset |
UEP0 |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the search space of the PDCCH channel.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:SSPace COMM|UESP [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:SSPace? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:SSPace UESP :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:SSPace? |
|
Choices |
Common | UE-Specific |
|
Preset |
UESP |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Per-subframe RACH PDCCH transmission grid.
Each row is addressed by the collection suffix TX<seq>, seq = 1..160 (Seq 1 = TX1).
Enables/disables the PDCCH transmission for this subframe entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:TX<seq>:STATe ON|OFF|1|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:TX<seq>:STATe? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:TX1:STATe ON :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:TX1:STATe? |
|
Choice |
Off | On |
|
Preset |
OFF |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the Random access preamble index carried in the DCI for this entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:TX<seq>:PRINdex <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:TX<seq>:PRINdex? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:TX1:PRINdex 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:TX1:PRINdex? |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
63 |
|
Initial S/W Revision |
A.20.01 |
Sets the PRACH mask index carried in the DCI for this entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:TX<seq>:PMINdex <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:TX<seq>:PMINdex? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:TX1:PMINdex 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:TX1:PMINdex? |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
15 |
|
Initial S/W Revision |
A.20.01 |
Sets the PDCCH aggregation level (number of CCEs).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:TX<seq>:AGGLevel L1|L2|L4|L8 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:TX<seq>:AGGLevel? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:TX1:AGGLevel L1 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:TX1:AGGLevel? |
|
Choices |
Agg Level 1 | Agg Level 2 | Agg Level 4 | Agg Level 8 |
|
Preset |
L1 |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the PDCCH candidate index within the search space for this entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:TX<seq>:CANDidate <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:TX<seq>:CANDidate? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:TX1:CANDidate 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:TX1:CANDidate? |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
5 |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the starting CCE offset for this entry (derived from candidate / aggregation level).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:RACH:DCI:TX<seq>:CCE:OFFSet? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:RACH:DCI:TX1:CCE:OFFSet? |
|
Preset |
11 (for seq 1 ) |
|
State Saved |
No |
|
Min |
0 |
|
Max |
1023 |
|
Initial S/W Revision |
A.20.01 |
Dedicated PDCCH settings for Uplink Power Control
Turns the operating state of the DCI channel on or off.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:STATe ON|OFF|1|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:STATe? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:STATe OFF :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:STATe? |
|
Choice |
Off | On |
|
Preset |
OFF |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the DCI Format for uplink power control transmitted on PDCCH.
See 3GPP TS 36.212 and 36.213.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:FORMat F3|FORMat3a [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:FORMat? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:FORMat F3 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:FORMat? |
|
Choice |
Format 3 | Format 3A. |
|
Couplings |
Determines DCI Payload Size and TPC Bits length. |
|
Preset |
F3 (Format 3) |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the data source of the DCI channel.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:DATa? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:DATA? |
|
Preset |
Auto |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the payload size in bits. Refer to the 3GPP technical standards for more information.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:PSIZe? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:PSIZe? |
|
Dependencies |
Read-only. Depends on DCI Format. |
|
Preset |
28+0 |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the C-RNTI for uplink power control transmitted on PDCCH.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:RNTi <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:RNTi? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:RNTi 1 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:RNTi? |
|
Notes |
Range 0 to 65535 (0x0000 to 0xFFFF); standard C-RNTI is 1 to 65523, but 0 to 65535 is allowed for flexible use. Accepts decimal or hexadecimal input; e.g. "15" or "0xf" both display as "15 (0x000F)". See 3GPP TS 36.211, 36.212 and 36.321. |
|
Preset |
1 (0x0001) |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
65535 |
|
Initial S/W Revision |
A.20.01 |
Sets the UE Tx Antenna for the selected DCI channel.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:UTXantenna UEP0|UEP1 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:UTXantenna? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:UTXantenna UEP0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:UTXantenna? |
|
Choice |
UE Port 0 | UE Port 1 |
|
Preset |
UEP0 |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the Search space of the PDCCH channel.
For uplink power control, this is fixed to Common and is read-only (BE getter-only).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:SSPace? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:SSPace? |
|
Notes |
Choice: Common | UE-Specific |
|
Dependencies |
Read-only. Fixed to Common. |
|
Preset |
COMM (Common) |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Per-subframe uplink-power-control PDCCH transmission grid.
Each row is addressed by the collection suffix TX<seq>, seq = 1..160 (Seq 1 = TX1).
Enables/disables the PDCCH transmission for this subframe entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:TX<seq>:STATe ON|OFF|1|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:TX<seq>:STATe? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:TX1:STATe ON :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:TX1:STATe? |
|
Preset |
OFF |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the TPC command bit string carried by the DCI Format 3 / 3A message for this entry (2 bits per UE for Format 3; 1 bit per UE for Format 3A).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:TX<seq>:TPCBits "<bits>" [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:TX<seq>:TPCBits? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:TX1:TPCBits "00000000000000000000000000000000" :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:TX1:TPCBits? |
|
Couplings |
Length depends on DCI Format and payload size. |
|
Preset |
0 (all zeros) |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the PDCCH aggregation level (number of CCEs).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:TX<seq>:AGGLevel L1|L2|L4|L8 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:TX<seq>:AGGLevel? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:TX1:AGGLevel L1 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:TX1:AGGLevel? |
|
Choices |
Agg Level 1 | Agg Level 2 | Agg Level 4 | Agg Level 8. |
|
Preset |
L1 |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the PDCCH candidate index within the search space for this entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:TX<seq>:CANDidate <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:TX<seq>:CANDidate? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:TX1:CANDidate 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:TX1:CANDidate? |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
5 |
|
Initial S/W Revision |
A.20.01 |
Displays the starting CCE offset for this entry (derived from candidate / aggregation level).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:ULPC:DCI:TX<seq>:CCE:OFFSet? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:ULPC:DCI:TX1:CCE:OFFSet? |
|
Preset |
4 |
|
State Saved |
No |
|
Min |
0 |
|
Max |
1023 |
|
Initial S/W Revision |
A.20.01 |
Manual PDCCH Setting
Turns the operating state of the DCI channel on or off.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:STATe ON|OFF|1|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:STATe? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:STATe ON :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:STATe? |
|
Choices |
Off | On |
|
Preset |
OFF |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the DCI format. See 3GPP TS 36.212 and 36.213.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:FORMat F0|F1|F1A|F1B|F1C|F1D|F2|F2A|F2B|F2C|F2D|F3|F3A|F4 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:FORMat? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:FORMat F1A :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:FORMat? |
|
Choices |
Format 0 | Format 1 | Format 1A | Format 1B | Format 1C | Format 1D | Format 2 | Format 2A | Format 2B | Format 2C | Format 2D | Format 3 | Format 3A | Format 4 . |
|
Couplings |
Determines DCI Payload Size. |
|
Preset |
F1A (Format 1A) |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the data source of the DCI channel. The per-subframe data source (PN9 / PN15 / User Defined Bits) is set in the Tx Config "Data" field (15.7.3.6).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:DATa? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:DATa? |
|
Preset |
Auto |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the payload size, in bits. Refer to the 3GPP technical standards for more information.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:PSIZe? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:PSIZe? |
|
Dependencies |
Read-only. Depends on DCI Format. |
|
Preset |
30+0 |
|
State Saved |
No |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the RNTI transmitted on PDCCH.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:RNTi <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:RNTi? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:RNTi 1 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:RNTi? |
|
Notes |
Range 0 to 65535 (0x0000 to 0xFFFF); standard RNTI is 1 to 65523 and 65533 to 65525, but 0 to 65535 is allowed for flexible use. Accepts decimal or hexadecimal input; e.g. "15" or "0xf" both display as "15 (0x000F)". See 3GPP TS 36.211, 36.212 and 36.321. |
|
Preset |
1 (0x0001) |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
65535 |
|
Initial S/W Revision |
A.20.01 |
Sets the UE Tx Antenna for the selected DCI channel.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:UTXantenna UEP0|UEP1 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:UTXantenna? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:UTXantenna UEP0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:UTXantenna? |
|
Choice |
UE Port 0 | UE Port 1 |
|
Preset |
UEP0 |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the search space of the PDCCH channel.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:SSPace COMM|UESP [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:SSPace? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:SSPace UESP :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:SSPace? |
|
Choices |
Common | UE-Specific. |
|
Preset |
UESP |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Per-subframe user-defined PDCCH transmission grid.
Each row is addressed by the collection suffix TX<seq>, seq = 1..160 (Seq 1 = TX1).
Enables/disables the PDCCH transmission for this subframe entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:TX<seq>:STATe ON|OFF|1|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:TX<seq>:STATe? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:TX1:STATe ON :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:TX1:STATe? |
|
Preset |
OFF |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the Data source for this entry.
Accepts AUTO, PN9, PN15, or a User Defined bit string ("01001100...").
Use the Data Source Selection dialog in the GUI to pick PN9 / PN15 / User Defined Bits.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:TX<seq>:DATa <PN9|PN15|AUTO|"bit string"> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:TX<seq>:DATa? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:TX1:DATA PN9 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:TX1:DATA? |
|
Preset |
AUTO |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the PDCCH aggregation level (number of CCEs).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:TX<seq>:AGGLevel L1|L2|L4|L8 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:TX<seq>:AGGLevel? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:TX1:AGGLevel L1 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:TX1:AGGLevel? |
|
Choices |
Agg Level 1 | Agg Level 2 | Agg Level 4 | Agg Level 8. |
|
Preset |
L1 |
|
State Saved |
Yes |
|
Min |
N/A |
|
Max |
N/A |
|
Initial S/W Revision |
A.20.01 |
Sets the PDCCH candidate index within the search space for this entry.
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:TX<seq>:CANDidate <integer> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:TX<seq>:CANDidate? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:TX1:CANDidate 0 :RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:TX1:CANDidate? |
|
Preset |
0 |
|
State Saved |
Yes |
|
Min |
0 |
|
Max |
5 |
|
Initial S/W Revision |
A.20.01 |
Query only
Displays the starting CCE offset for this entry (derived from candidate / aggregation level).
|
SCPI Command |
[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:DLINk:DCI:UDEF:DCI:TX<seq>:CCE:OFFSet? |
|
SCPI Example |
:RADio:LTETdd:WAVeform:ARB:CCARrier:DLINk:DCI:UDEF:DCI:TX1:CCE:OFFSet? |
|
Preset |
13 (for seq 1) |
|
State Saved |
No |
|
Min |
0 |
|
Max |
1023 |
|
Initial S/W Revision |
A.20.01 |